LoRaMacUS902Hybrid Class Reference

Inheritance diagram for LoRaMacUS902Hybrid:

Public Member Functions
	LoRaMacUS902Hybrid (LoRaRadioChip &radio, uint16_t radioWakeupTime=1)
error_t	beginJoining (const uint8_t *devEui, const uint8_t *appEui, const uint8_t *appKey)
	Over-the-Air Activation (OTAA) 방식의 join을 시도합니다.
Public Member Functions inherited from LoRaMacUS902
	LoRaMacUS902 (LoRaRadioChip &radio, uint16_t radioWakeupTime=1)
error_t	addChannel (uint8_t id, ChannelParams_t params)
	Add a channel.
error_t	removeChannel (uint8_t id)
	LoRaMAC channel remove service.
const ChannelParams_t *	getChannel (uint8_t index)
	채널 정보를 가져옵니다.
uint8_t	getMaxPayload (uint8_t dr, bool repeater=false) override
	최대 application payload 길이(N)를 가져옵니다.
virtual uint32_t	getRx1Frequency () override
	Rx1에서 사용할 주파수를 가져옵니다.
virtual uint8_t	getRx1Datarate () override
	Rx1에 사용될, DR offset이 적용된 DR을 가져옵니다.
Public Member Functions inherited from LoRaMac
	LoRaMac (LoRaRadioChip &, int8_t defTxPower, int8_t defDatarate, bool dutyCycleOn, uint8_t numChannels, const DatarateParams_t *drTable, uint8_t maxDatarate, uint8_t minTxPower, uint8_t maxTxPower, uint8_t adrAckLimit, uint8_t adrAckDelay, uint32_t maxFCntGap, uint16_t radioWakeupTime=1)
virtual error_t	begin (uint8_t(*getBatteryLevel)()=NULL)
	LoRaMAC layer initialization.
error_t	linkMulticastChannel (MulticastParams_t *channelParam)
	LoRaMAC multicast channel link service.
error_t	unlinkMulticastChannel (MulticastParams_t *channelParam)
	LoRaMAC multicast channel unlink service.
error_t	beginJoining (const uint8_t *devEui, const uint8_t *appKey)
bool	isJoining ()
	현재 OTAA Join 중인지 확인합니다.
void	onJoin (void(*func)(LoRaMac &mac, bool result, const uint8_t *devEui, const uint8_t *appEui, const uint8_t *appKey, const uint8_t *nwkSKey, const uint8_t *appSKey, uint32_t devAddr, const RadioPacket &frame, uint32_t airTime))
	Join이 완료되었을 때 호출될 콜백함수를 지정합니다.
void	onJoinRequested (void(*func)(LoRaMac &, uint32_t frequencyHz, const DatarateParams_t &))
	JoinRequest 메시지를 보낼 때 호출될 콜백함수를 지정합니다.
virtual void	setABP (const uint8_t *nwkSKey, const uint8_t *appSKey, uint32_t devAddr)
	ABP를 사용하도록 설정합니다.
void	setPublicNetwork (bool enable)
	공용 LoRaWAN 네트워크를 사용할지 설정합니다.
DeviceClass_t	getDeviceClass ()
	Device class를 가져옵니다.
error_t	setDeviceClass (DeviceClass_t c)
	Device class를 설정합니다.
error_t	setDeviceClass (DeviceClass_t c, bool sendDeviceModeInd, void(*func)(LoRaMac &, DeviceClass_t))
const DatarateParams_t *	getDatarate (uint8_t index) const
	Datarate 정보를 가져옵니다.
uint8_t	getRx2Datarate ()
	Rx2에서 사용할 DR을 가져옵니다.
void	setRx2Datarate (uint8_t dr)
	Rx2에서 사용할 DR을 임의로 설정합니다.
uint32_t	getRx2Frequency ()
	Rx2에서 사용할 주파수를 가져옵니다.
void	setRx2Frequency (uint32_t f)
	Rx2에서 사용할 주파수를 임의로 설정합니다.
uint8_t	getRx1DrOffset ()
	Rx1에 적용될 DR offset을 가져옵니다.
int32_t	getNetworkID ()
	Network ID를 가져옵니다.
uint32_t	getDeviceAddress ()
	Device address를 가져옵니다.
uint16_t	getRx1Delay ()
	Tx 종료 후 Rx1 window가 열릴 때까지의 지연 시간(단위: 밀리초)을 가져옵니다.
uint16_t	getRx2Delay ()
	Tx 종료 후 Rx2 window가 열릴 때까지의 지연 시간(단위: 밀리초)을 가져옵니다.
uint16_t	getJoinAcceptDelay1 ()
	JoinRequest 송신 후 Rx1 window가 열릴 때까지의 지연 시간(단위: 밀리초)을 가져옵니다.
uint16_t	getJoinAcceptDelay2 ()
	JoinRequest 송신 후 Rx2 window가 열릴 때까지의 지연 시간(단위: 밀리초)을 가져옵니다.
uint8_t	getCurrentDatarateIndex ()
	현재 설정된 기본 datarate 인덱스를 가져옵니다.
error_t	setCurrentDatarateIndex (uint8_t index)
	기본 datarate를 설정합니다.
uint8_t	getCurrentTxPowerIndex ()
	기본 Tx power index를 가져옵니다.
error_t	setCurrentTxPowerIndex (uint8_t index)
	기본 Tx power를 설정합니다.
uint32_t	getUpLinkCounter ()
	Uplink용 frame counter (fCntUp) 를 가져옵니다.
virtual void	setUpLinkCounter (uint32_t)
	Uplink용 frame counter (fCntUp) 를 설정합니다.
uint32_t	getDownLinkCounter ()
	Downlink용 frame counter (fCntDown) 를 가져옵니다.
virtual void	setDownLinkCounter (uint32_t)
	Downlink용 frame counter (fCntDown) 를 설정합니다.
uint8_t	getNumRepetitions ()
	현재 설정된 unconfirmed uplink frame에 적용되는 반복 전송 횟수를 가져옵니다.
uint8_t	getMaxDutyCycle ()
	현재의 최대 duty cycle을 가져옵니다.
error_t	send (LoRaMacFrame *frame)
	frame 을 전송합니다.
error_t	cancelSend (LoRaMacFrame *frame)
	frame 전송을 취소합니다.
void	onSendDone (void(*sendDoneHandler)(LoRaMac &, LoRaMacFrame *))
	전송이 완료될 때 호출될 함수를 지정합니다.
void	onReceive (void(*receiveHandler)(LoRaMac &radio, const LoRaMacFrame *frame))
	수신이 완료될 때 호출될 함수를 지정합니다.
void	onReceiveErrorFrame (void(*receiveHandler)(LoRaMac &radio, const RadioPacket &frame))
	비정상 프레임 수신시 호출될 함수를 지정합니다.
uint8_t	getPendingMacCommandsLength ()
	현재 송신 대기 중인 MAC commands의 길이를 가져옵니다.
std::array< uint8_t, 8 >	getDevEui ()
	Device EUI를 가져옵니다.
std::array< uint8_t, 8 >	getAppEui ()
	Application EUI를 가져옵니다.
std::array< uint8_t, 16 >	getAppKey ()
	AppKey를 가져옵니다.
std::array< uint8_t, 16 >	getNwkSKey ()
	NwkSKey를 가져옵니다.
std::array< uint8_t, 16 >	getAppSKey ()
	AppSKey를 가져옵니다.
virtual error_t	requestLinkCheck ()
	LinkCheckReq MAC command를 요청합니다.
error_t	requestLinkCheck (void(*func)(LoRaMac &))
	LinkCheckReq MAC command를 요청합니다.
void	onLinkChecked (void(*func)(LoRaMac &, uint8_t demodMargin, uint8_t numGateways))
	LinkCheckReq MAC command에 대한 응답(LinkCheckAns)이 올 경우 호출될 콜백함수를 지정합니다.
error_t	requestDeviceTime (RTCCalendar *rtc)
	DeviceTimeReq MAC command를 요청합니다.
error_t	requestDeviceTime (RTCCalendar *rtc, void(*func)(LoRaMac &))
	DeviceTimeReq MAC command를 요청합니다.
error_t	requestDeviceTime (void(*func)(LoRaMac &)=nullptr)
	DeviceTimeReq MAC command를 요청합니다.
void	onDeviceTimeAnswered (void(*func)(LoRaMac &, bool success, uint32_t tSeconds, uint8_t tFracSeconds), RTCCalendar *rtc)
	DeviceTimeReq MAC command에 대한 응답(DeviceTimeAns)이 올 경우 호출될 콜백함수와 RTCCalendar 를 지정합니다.
void	onLinkADRReqReceived (void(*func)(LoRaMac &, const uint8_t *))
	LinkADRReq MAC command를 수신시 호출될 콜백함수를 지정합니다.
void	onLinkADRAnsSent (void(*func)(LoRaMac &, uint8_t status))
	LinkADRAns MAC command를 송신시 호출될 콜백함수를 지정합니다.
void	onDutyCycleReqReceived (void(*func)(LoRaMac &, const uint8_t *))
	DutyCycleReq MAC command를 수신시 호출될 콜백함수를 지정합니다.
void	onDutyCycleAnsSent (void(*func)(LoRaMac &))
	DutyCycleAns MAC command를 송신시 호출될 콜백함수를 지정합니다.
void	onRxParamSetupReqReceived (void(*func)(LoRaMac &, const uint8_t *))
	RxParamSetupReq MAC command를 수신시 호출될 콜백함수를 지정합니다.
void	onRxParamSetupAnsSent (void(*func)(LoRaMac &, uint8_t status))
	RxParamSetupAns MAC command를 송신시 호출될 콜백함수를 지정합니다.
void	onDevStatusReqReceived (void(*func)(LoRaMac &))
	DevStatusReq MAC command를 수신시 호출될 콜백함수를 지정합니다.
void	onDevStatusAnsSent (void(*func)(LoRaMac &, uint8_t bat, uint8_t margin))
	DevStatusAns MAC command를 송신시 호출될 콜백함수를 지정합니다.
void	onNewChannelReqReceived (void(*func)(LoRaMac &, const uint8_t *))
	NewChannelReq MAC command를 수신시 호출될 콜백함수를 지정합니다.
void	onNewChannelAnsSent (void(*func)(LoRaMac &, uint8_t status))
	NewChannelAns MAC command를 송신시 호출될 콜백함수를 지정합니다.
void	onRxTimingSetupReqReceived (void(*func)(LoRaMac &, const uint8_t *))
	RxTimingSetupReq MAC command를 수신시 호출될 콜백함수를 지정합니다.
void	onRxTimingSetupAnsSent (void(*func)(LoRaMac &))
	RxTimingSetupReq MAC command를 수신시 호출될 콜백함수를 지정합니다.
Public Member Functions inherited from PacketRadio
error_t	send (RadioPacket *frame)
	frame 을 전송합니다.
error_t	cancelSend (RadioPacket *frame)
	frame 전송을 취소합니다.
void	onSendDone (void(*sendDoneHandler)(PacketRadio &, RadioPacket *))
	전송이 완료될 때 호출될 함수를 지정합니다.
uint8_t	getNumPendingSendFrames ()
	전송 대기 중인 프레임 갯수를 구합니다.
void	onReceive (void(*receiveHandler)(PacketRadio &, const RadioPacket *))
	수신이 완료될 때 호출될 함수를 지정합니다.
void	setEventListener (PacketRadioEventListener &)
	전송 완료 및 수신 이벤트에 대해 PacketRadioEventListener 를 구현한 클래스로 콜백합니다.

Protected Member Functions
void	resetRegionState () override
Protected Member Functions inherited from LoRaMac
void	resetSessionState ()
virtual int8_t	applyDlChannel (const uint8_t *payload)
virtual void	applyTxParamSetup (uint8_t payload)
virtual bool	checkTxFrame (LoRaMacFrame *frame)
virtual void	sendDone (RadioPacket *frame, RadioPacket::Result_t)
virtual void	receive (LoRaMacFrame *frame)
virtual void	notifyJoin ()
int8_t	getChannelIndex (uint32_t frequency)
int8_t	getDatarateIndex (DatarateParams_t &dr)
int8_t	getDatarateIndex (LoRaMacFrame &f)
int8_t	getDatarateIndex (LoRaMacFrame *f)
bool	checkTxFrame (RadioPacket *frame)
void	handleRxFrame (RadioPacket *frame)
void	log (const char *name, const char *msg)
void	logTx (const char *name, uint32_t freq, uint8_t drIndex, int8_t power)
void	logRx (const char *name, uint32_t freq, uint8_t drIndex, uint8_t window)
error_t	setupRxWindow (uint8_t slot)
void	onRxWindow2TimerEvent ()
void	closeRxWindow ()
virtual FCntDownStatus_t	getFCntDown (uint16_t fCntFHDR, uint32_t &newFCnt)
bool	requestsAck ()
virtual void	eventTxDelayed ()
virtual bool	channelSupportsDR (const ChannelParams_t &channel, uint8_t dr) const
	Checks whether a channel's DRRange includes the given datarate. Override to interpret region-specific non-contiguous ranges. Radio capability and datarate validity are checked separately.
void	computeRxWindowParameters (uint8_t drIndex, uint16_t *timeout, int16_t *offset, uint8_t minRxSymbols=6, uint32_t systemMaxRxError=10)
virtual uint8_t	parseDevTimeAns (const uint8_t *payload, uint8_t len, struct timeval *t)
	DevTimeAns에 대한 parser.
Protected Member Functions inherited from PacketRadio
virtual void	receive (RadioPacket *frame)
RadioPacket *	getNextTxFrame ()
error_t	enqueueTxFrame (RadioPacket *frame)
virtual void	notifySendDone (RadioPacket *frame)
virtual void	notifyReceive (RadioPacket *frame)

Additional Inherited Members
Public Types inherited from LoRaMac
enum	DeviceClass_t { CLASS_A = 0 , CLASS_B = 1 , CLASS_C = 2 }
enum	BatteryLevel_t { BAT_LEVEL_EXT_SRC = 0x00 , BAT_LEVEL_EMPTY = 0x01 , BAT_LEVEL_FULL = 0xFE , BAT_LEVEL_NO_MEASURE = 0xFF }
enum	{ ERROR_INVALID_FREQUENCY = -100 , ERROR_INVALID_DATARATE = -101 , ERROR_INVALID_FREQ_AND_DR = -102 }
enum	MacCmd_t {   MAC_CMD_LINK_CHECK = 0x02 , MAC_CMD_LINK_ADR = 0x03 , MAC_CMD_DUTY_CYCLE = 0x04 , MAC_CMD_RX_PARAM_SETUP = 0x05 ,   MAC_CMD_DEV_STATUS = 0x06 , MAC_CMD_NEW_CHANNEL = 0x07 , MAC_CMD_RX_TIMING_SETUP = 0x08 , MAC_CMD_TX_PARAM_SETUP = 0x09 ,   MAC_CMD_DL_CHANNEL = 0x0A , MAC_CMD_DEV_TIME = 0x0D }
Public Types inherited from PacketRadio
enum	{ TX_FIFO_SIZE = 10 , RX_FIFO_SIZE = 10 , TX_DONE_FIFO_SIZE = 10 }
Static Public Member Functions inherited from LoRaMac
static void	ComputeMic (const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t address, uint8_t dir, uint32_t sequenceCounter, uint32_t *mic)
static void	PayloadEncrypt (const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t address, uint8_t dir, uint32_t sequenceCounter, uint8_t *encBuffer)
static void	PayloadDecrypt (const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t address, uint8_t dir, uint32_t sequenceCounter, uint8_t *decBuffer)
static void	JoinComputeMic (const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t *mic)
static void	JoinDecrypt (const uint8_t *buffer, uint16_t size, const uint8_t *key, uint8_t *decBuffer)
static void	JoinComputeSKeys (const uint8_t *key, const uint8_t *appNonce, uint16_t devNonce, uint8_t *nwkSKey, uint8_t *appSKey)
Public Attributes inherited from LoRaMac
uint8_t const	MaxNumChannels
	최대 채널 수
const DatarateParams_t *	DR_TABLE
uint8_t const	MaxDatarate
	지정된 최대 datarate index. 칩이 지원하지 않는 SF는 별도로 제외합니다.
uint8_t const	MinTxPower
	Minimum Tx power index.
uint8_t const	MaxTxPower
	Maximum Tx power index.
uint8_t const	AdrAckLimit
	ADR_ACK_LIMIT.
uint8_t const	AdrAckDelay
	ADR_ACK_DELAY.
uint32_t const	MAX_FCNT_GAP
uint16_t const	RadioWakeupTime
bool	useADR = true
	ADR 사용여부를 설정합니다.
bool	receivesDuplicate = false
	중복 프레임을 수신 여부를 설정합니다.
bool	framePending = false
	Frame pending.
void(*	onUplinkDone )(LoRaMac &, LoRaMacFrame *) = nullptr
	Uplink (Tx) 전송이 완료될 때 호출될 함수를 지정합니다.
void(*	onRxWindowClosed )(LoRaMac &mac, uint8_t window, struct timeval nextWindowAt) = nullptr
	Class A RX1 또는 RX2 수신 창이 닫힌 뒤 작업 문맥에서 호출됩니다.
void(*	onMACCommandReceived )(LoRaMac &mac, MacCmd_t cid, const uint8_t *reqData, int16_t reqLen, const uint8_t *ansData, int16_t ansLen) = nullptr
	MAC command 수신시 호출될 함수 포인터
void(*	onMACCommandSend )(LoRaMac &mac, MacCmd_t cid, const uint8_t *data, uint8_t len) = nullptr
	MAC command 송신시 호출될 함수 포인터
Protected Types inherited from LoRaMac
enum	FrameType_t {   FRAME_TYPE_JOIN_REQ = 0x00 , FRAME_TYPE_JOIN_ACCEPT = 0x01 , FRAME_TYPE_DATA_UNCONFIRMED_UP = 0x02 , FRAME_TYPE_DATA_UNCONFIRMED_DOWN = 0x03 ,   FRAME_TYPE_DATA_CONFIRMED_UP = 0x04 , FRAME_TYPE_DATA_CONFIRMED_DOWN = 0x05 , FRAME_TYPE_RFU = 0x06 , FRAME_TYPE_PROPRIETARY = 0x07 }
enum	{   ADR_ACK_LIMIT = 64 , ADR_ACK_DELAY = 32 , PHY_PAYLOAD_MAX_LENGTH = 255 , MAC_COMMAND_MAX_LENGTH = 15 ,   FRM_PAYLOAD_MAX_LENGTH = 242 }
enum	EventInfoStatus_t {   EVENT_INFO_STATUS_OK = 0 , EVENT_INFO_STATUS_ERROR , EVENT_INFO_STATUS_TX_TIMEOUT , EVENT_INFO_STATUS_RX1_TIMEOUT ,   EVENT_INFO_STATUS_RX2_TIMEOUT , EVENT_INFO_STATUS_JOIN_FAIL , EVENT_INFO_STATUS_DOWNLINK_REPEATED , EVENT_INFO_STATUS_ADDRESS_FAIL ,   EVENT_INFO_STATUS_MIC_FAIL , EVENT_INFO_STATUS_CHANNEL_BUSY }
enum	{   MAC_IDLE = 0x00000000ul , MAC_TX_RUNNING = 0x00000001ul , MAC_RX = 0x00000002ul , MAC_ACK_REQ = 0x00000004ul ,   MAC_ACK_RETRY = 0x00000008ul , MAC_TX_DELAYED = 0x00000010ul , MAC_TX_CONFIG = 0x00000020ul }
enum	FCntDownStatus_t { NEW_FCNT_OK = 0 , NEW_FCNT_DUPLICATE , NEW_FCNT_MAX_GAP_EXCEEDED }
Static Protected Member Functions inherited from LoRaMac
static void	resetChannels (ChannelParams_t *channels, uint8_t count, const ChannelParams_t *defaults=nullptr, uint8_t defaultCount=0)
static void	resetChannelMask (uint16_t *mask, uint8_t words, uint8_t enabledCount)
static void	OnTxDelayedTimerEvent (void *)
static void	OnMacStateCheckTimerEvent (void *)
static void	dispatchRxWindowClosedEvents (void *ctx)
Protected Attributes inherited from LoRaMacUS902
uint16_t	ChannelsMaskRemaining [6]
uint16_t	ChannelsMask [6]
Protected Attributes inherited from LoRaMac
bool	PublicNetwork = true
bool	RepeaterSupport = false
bool	joining = false
bool	isLinkCheckRequested = false
bool	isDeviceTimeRequested = false
bool	isLinkCheckSent = false
bool	isDeviceTimeSent = false
bool	serverAckRequested = false
bool	DutyCycleOn
bool	ackTimeoutRetry = false
bool	stateCheckerPosted = false
bool	isOptNegSet = false
LoRaRadioChip &	Radio
std::array< uint8_t, 8 >	devEui
std::array< uint8_t, 8 >	appEui
std::array< uint8_t, 16 >	appKey
std::array< uint8_t, 16 >	nwkSKey
std::array< uint8_t, 16 >	appSKey
uint16_t	LoRaMacDevNonce
int32_t	netID = -1
uint32_t	LoRaMacDevAddr
MulticastParams_t *	MulticastChannels = NULL
DeviceClass_t	deviceClass = CLASS_A
uint8_t	Buffer [PHY_PAYLOAD_MAX_LENGTH]
uint16_t	BufferPktLen = 0
uint8_t	LoRaMacPayload [PHY_PAYLOAD_MAX_LENGTH]
uint32_t	UpLinkCounter = 1
uint32_t	DownLinkCounter = 0
uint32_t	AdrAckCounter = 0
uint8_t	MacCommandsBufferIndex = 0
uint8_t	MacCommandsBuffer [MAC_COMMAND_MAX_LENGTH]
struct {
uint32_t   Frequency
uint8_t   Datarate
}	Rx2Channel
uint8_t	Rx1DrOffset = 0
int8_t	ChannelsTxPower
int8_t	ChannelsDefaultTxPower
int8_t	ChannelsDatarate
int8_t	ChannelsDefaultDatarate
uint8_t	ChannelsNbRepDefault = 1
uint8_t	ChannelsNbRep
uint8_t	ChannelsNbRepCounter = 0
uint8_t	MaxDCycle = 0
uint16_t	AggregatedDCycle = 1
uint32_t	AggregatedLastTxDoneTime = 0
uint32_t	AggregatedTimeOff = 0
uint8_t	currentCH
uint32_t	LoRaMacState = MAC_IDLE
Timer	MacStateCheckTimer
uint8_t(*	getBatteryLevel )()
Timer	TxDelayedTimer
Timer	RxWindowTimer1
Timer	RxWindowTimer2
bool	rxWindowActive = false
struct timeval	rxWindow2At = {}
Timer	TxTimeoutTimer
uint16_t	ReceiveDelay1
uint16_t	ReceiveDelay2
uint16_t	JoinAcceptDelay1
uint16_t	JoinAcceptDelay2
uint16_t	rxWindow1Delay
uint16_t	rxWindow2Delay
uint16_t	rxWindow1Timeout
uint16_t	rxWindow2Timeout
int16_t	rxWindow1Offset
int16_t	rxWindow2Offset
Timer	AckTimeoutTimer
uint8_t	AckTimeoutRetries = 1
uint8_t	AckTimeoutRetriesCounter = 1
uint32_t	TxTimeOnAir
struct {
EventInfoStatus_t   Status
}	McpsIndication
struct {
EventInfoStatus_t   Status
bool   AckReceived
uint32_t   UpLinkCounter
}	McpsConfirm
struct timeval	tDevTimeRequested
RTCCalendar *	rtc = NULL
uint8_t	RxSlot = 0
bool	isMcpsReq = false
bool	isMcpsInd = false
bool	isMacDone = false
LoRaMacFrame *	txFrame = NULL
LoRaMacFrame *	rxFrame = NULL
void(*	joinHandler )(LoRaMac &, bool result, const uint8_t *devEui, const uint8_t *appEui, const uint8_t *appKey, const uint8_t *nwkSKey, const uint8_t *appSKey, uint32_t devAddr, const RadioPacket &frame, uint32_t airTime) = NULL
void(*	receiveErrorFrameHandler )(LoRaMac &, const RadioPacket &frame) = nullptr
Protected Attributes inherited from PacketRadio
Queue< RadioPacket * >	txFifo
Queue< RadioPacket * >	rxFifo
Queue< RadioPacket * >	txDoneFifo
void(*	callbackSendDone )(PacketRadio &, RadioPacket *)
void(*	callbackReceive )(PacketRadio &, const RadioPacket *)
PacketRadioEventListener *	eventListener

Member Function Documentation

beginJoining()

error_t LoRaMacUS902Hybrid::beginJoining ( const uint8_t * devEui, const uint8_t * appEui, const uint8_t * appKey )

virtual

Over-the-Air Activation (OTAA) 방식의 join을 시도합니다.

Parameters

devEui	Device EUI (MSB first)
appEui	Application EUI (MSB first)
appKey	Application Key

static void eventLoRaWANJoin(
  LoRaMac &,
  bool joined,
  const uint8_t *joinedDevEui,
  const uint8_t *joinedAppEui,
  const uint8_t *joinedAppKey,
  const uint8_t *joinedNwkSKey,
  const uint8_t *joinedAppSKey,
  uint32_t joinedDevAddr,
  const RadioPacket &frame,
  uint32_t airTime
) {
#if (OVER_THE_AIR_ACTIVATION == 1)
  if (joined) {
    if (joinedNwkSKey && joinedAppSKey) {
      // Status is OK, node has joined the network
      printf("* Joined to the network!\n");
      postTask(taskPeriodicSend, NULL);
    } else {
      printf("* PseudoAppKey joining done!\n");
    }
  } else {
    printf("* Join failed. Retry to join\n");
    LoRaWAN.beginJoining(devEui, appEui, appKey);
  }
#endif
}

Join은 1회만 시도하므로, 계속 join을 시도해야 할 경우 이 함수를 다시 호출하여야 합니다.

Reimplemented from LoRaMacUS902.

resetRegionState()

void LoRaMacUS902Hybrid::resetRegionState ( )

overrideprotectedvirtual

Reimplemented from LoRaMacUS902.

---

The documentation for this class was generated from the following file:

• include/LoRaMacUS902Hybrid.hpp