Functions used for SPAD managements. More...

Functions
VL53L0X_API VL53L0X_Error	VL53L0X_SetSpadAmbientDamperThreshold (VL53L0X_DEV Dev, uint16_t SpadAmbientDamperThreshold)
	Set the SPAD Ambient Damper Threshold value.
VL53L0X_API VL53L0X_Error	VL53L0X_GetSpadAmbientDamperThreshold (VL53L0X_DEV Dev, uint16_t *pSpadAmbientDamperThreshold)
	Get the current SPAD Ambient Damper Threshold value.
VL53L0X_API VL53L0X_Error	VL53L0X_SetSpadAmbientDamperFactor (VL53L0X_DEV Dev, uint16_t SpadAmbientDamperFactor)
	Set the SPAD Ambient Damper Factor value.
VL53L0X_API VL53L0X_Error	VL53L0X_GetSpadAmbientDamperFactor (VL53L0X_DEV Dev, uint16_t *pSpadAmbientDamperFactor)
	Get the current SPAD Ambient Damper Factor value.
VL53L0X_API VL53L0X_Error	VL53L0X_PerformRefSpadManagement (VL53L0X_DEV Dev, uint32_t refSpadCount, uint8_t isApertureSpads)
	Performs Reference Spad Management.
VL53L0X_API VL53L0X_Error	VL53L0X_SetReferenceSpads (VL53L0X_DEV Dev, uint32_t refSpadCount, uint8_t isApertureSpads)
	Applies Reference SPAD configuration.
VL53L0X_API VL53L0X_Error	VL53L0X_GetReferenceSpads (VL53L0X_DEV Dev, uint32_t refSpadCount, uint8_t isApertureSpads)
	Retrieves SPAD configuration.

Detailed Description

Functions used for SPAD managements.

Function Documentation

◆ VL53L0X_GetReferenceSpads()

VL53L0X_API VL53L0X_Error VL53L0X_GetReferenceSpads	(	VL53L0X_DEV	Dev,
		uint32_t *	refSpadCount,
		uint8_t *	isApertureSpads )

Retrieves SPAD configuration.

Function Description: This function retrieves the current number of applied reference spads and also their type : Aperture or Non-Aperture.

Note: This function Access to the device

Parameters

Dev	Device Handle
refSpadCount	Number ref Spad Count
isApertureSpads	Reports if spads are of type aperture or non-aperture. 1:=aperture, 0:=Non-Aperture

Returns: VL53L0X_ERROR_NONE Success; VL53L0X_ERROR_REF_SPAD_INIT Error in the in the reference spad configuration.; "Other error code" See VL53L0X_Error

◆ VL53L0X_GetSpadAmbientDamperFactor()

VL53L0X_API VL53L0X_Error VL53L0X_GetSpadAmbientDamperFactor	(	VL53L0X_DEV	Dev,
		uint16_t *	pSpadAmbientDamperFactor )

Get the current SPAD Ambient Damper Factor value.

Function Description: This function get the SPAD Ambient Damper Factor value

Note: This function Access to the device

Parameters

Dev	Device Handle
pSpadAmbientDamperFactor	Pointer to programmed SPAD Ambient Damper Factor value

Returns: VL53L0X_ERROR_NONE Success; "Other error code" See VL53L0X_Error

◆ VL53L0X_GetSpadAmbientDamperThreshold()

VL53L0X_API VL53L0X_Error VL53L0X_GetSpadAmbientDamperThreshold	(	VL53L0X_DEV	Dev,
		uint16_t *	pSpadAmbientDamperThreshold )

Get the current SPAD Ambient Damper Threshold value.

Function Description: This function get the SPAD Ambient Damper Threshold value

Note: This function Access to the device

Parameters

Dev	Device Handle
pSpadAmbientDamperThreshold	Pointer to programmed SPAD Ambient Damper Threshold value

Returns: VL53L0X_ERROR_NONE Success; "Other error code" See VL53L0X_Error

◆ VL53L0X_PerformRefSpadManagement()

VL53L0X_API VL53L0X_Error VL53L0X_PerformRefSpadManagement	(	VL53L0X_DEV	Dev,
		uint32_t *	refSpadCount,
		uint8_t *	isApertureSpads )

Performs Reference Spad Management.

Function Description: The reference SPAD initialization procedure determines the minimum amount of reference spads to be enables to achieve a target reference signal rate and should be performed once during initialization.

Note: This function Access to the device; This function change the device mode to VL53L0X_DEVICEMODE_SINGLE_RANGING

Parameters

Dev	Device Handle
refSpadCount	Reports ref Spad Count
isApertureSpads	Reports if spads are of type aperture or non-aperture. 1:=aperture, 0:=Non-Aperture

Returns: VL53L0X_ERROR_NONE Success; VL53L0X_ERROR_REF_SPAD_INIT Error in the Ref Spad procedure.; "Other error code" See VL53L0X_Error

◆ VL53L0X_SetReferenceSpads()

VL53L0X_API VL53L0X_Error VL53L0X_SetReferenceSpads	(	VL53L0X_DEV	Dev,
		uint32_t	refSpadCount,
		uint8_t	isApertureSpads )

Applies Reference SPAD configuration.

Function Description: This function applies a given number of reference spads, identified as either Aperture or Non-Aperture. The requested spad count and type are stored within the device specific parameters data for access by the host.

Note: This function Access to the device

Parameters

Dev	Device Handle
refSpadCount	Number of ref spads.
isApertureSpads	Defines if spads are of type aperture or non-aperture. 1:=aperture, 0:=Non-Aperture

Returns: VL53L0X_ERROR_NONE Success; VL53L0X_ERROR_REF_SPAD_INIT Error in the in the reference spad configuration.; "Other error code" See VL53L0X_Error

◆ VL53L0X_SetSpadAmbientDamperFactor()

VL53L0X_API VL53L0X_Error VL53L0X_SetSpadAmbientDamperFactor	(	VL53L0X_DEV	Dev,
		uint16_t	SpadAmbientDamperFactor )

Set the SPAD Ambient Damper Factor value.

Function Description: This function set the SPAD Ambient Damper Factor value

Note: This function Access to the device

Parameters

Dev	Device Handle
SpadAmbientDamperFactor	SPAD Ambient Damper Factor value

Returns: VL53L0X_ERROR_NONE Success; "Other error code" See VL53L0X_Error

◆ VL53L0X_SetSpadAmbientDamperThreshold()

VL53L0X_API VL53L0X_Error VL53L0X_SetSpadAmbientDamperThreshold	(	VL53L0X_DEV	Dev,
		uint16_t	SpadAmbientDamperThreshold )

Set the SPAD Ambient Damper Threshold value.

Function Description: This function set the SPAD Ambient Damper Threshold value

Note: This function Access to the device

Parameters

Dev	Device Handle
SpadAmbientDamperThreshold	SPAD Ambient Damper Threshold value

Returns: VL53L0X_ERROR_NONE Success; "Other error code" See VL53L0X_Error