Error and Warning code returned by API

Macros
#define	VL53L0X_ERROR_NONE   ((VL53L0X_Error)0)
#define	VL53L0X_ERROR_CALIBRATION_WARNING   ((VL53L0X_Error)-1)
#define	VL53L0X_ERROR_MIN_CLIPPED   ((VL53L0X_Error)-2)
#define	VL53L0X_ERROR_UNDEFINED   ((VL53L0X_Error)-3)
#define	VL53L0X_ERROR_INVALID_PARAMS   ((VL53L0X_Error)-4)
#define	VL53L0X_ERROR_NOT_SUPPORTED   ((VL53L0X_Error)-5)
#define	VL53L0X_ERROR_RANGE_ERROR   ((VL53L0X_Error)-6)
#define	VL53L0X_ERROR_TIME_OUT   ((VL53L0X_Error)-7)
#define	VL53L0X_ERROR_MODE_NOT_SUPPORTED   ((VL53L0X_Error)-8)
#define	VL53L0X_ERROR_BUFFER_TOO_SMALL   ((VL53L0X_Error)-9)
#define	VL53L0X_ERROR_GPIO_NOT_EXISTING   ((VL53L0X_Error)-10)
#define	VL53L0X_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED   ((VL53L0X_Error)-11)
#define	VL53L0X_ERROR_INTERRUPT_NOT_CLEARED   ((VL53L0X_Error)-12)
#define	VL53L0X_ERROR_CONTROL_INTERFACE   ((VL53L0X_Error)-20)
#define	VL53L0X_ERROR_INVALID_COMMAND   ((VL53L0X_Error)-30)
#define	VL53L0X_ERROR_DIVISION_BY_ZERO   ((VL53L0X_Error)-40)
#define	VL53L0X_ERROR_REF_SPAD_INIT   ((VL53L0X_Error)-50)
#define	VL53L0X_ERROR_NOT_IMPLEMENTED   ((VL53L0X_Error)-99)

Typedefs
typedef int8_t	VL53L0X_Error

Detailed Description

The following DEFINE are used to identify the PAL ERROR

Macro Definition Documentation

VL53L0X_ERROR_BUFFER_TOO_SMALL

#define VL53L0X_ERROR_BUFFER_TOO_SMALL   ((VL53L0X_Error)-9)

...

VL53L0X_ERROR_CALIBRATION_WARNING

#define VL53L0X_ERROR_CALIBRATION_WARNING   ((VL53L0X_Error)-1)

Warning invalid calibration data may be in used VL53L0X_InitData() VL53L0X_GetOffsetCalibrationData VL53L0X_SetOffsetCalibrationData

VL53L0X_ERROR_CONTROL_INTERFACE

#define VL53L0X_ERROR_CONTROL_INTERFACE   ((VL53L0X_Error)-20)

error reported from IO functions

VL53L0X_ERROR_DIVISION_BY_ZERO

#define VL53L0X_ERROR_DIVISION_BY_ZERO   ((VL53L0X_Error)-40)

In the function a division by zero occurs

VL53L0X_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED

#define VL53L0X_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED   ((VL53L0X_Error)-11)

unsupported GPIO functionality

VL53L0X_ERROR_GPIO_NOT_EXISTING

#define VL53L0X_ERROR_GPIO_NOT_EXISTING   ((VL53L0X_Error)-10)

User tried to setup a non-existing GPIO pin

VL53L0X_ERROR_INTERRUPT_NOT_CLEARED

#define VL53L0X_ERROR_INTERRUPT_NOT_CLEARED   ((VL53L0X_Error)-12)

Error during interrupt clear

VL53L0X_ERROR_INVALID_COMMAND

#define VL53L0X_ERROR_INVALID_COMMAND   ((VL53L0X_Error)-30)

The command is not allowed in the current device state (power down)

VL53L0X_ERROR_INVALID_PARAMS

#define VL53L0X_ERROR_INVALID_PARAMS   ((VL53L0X_Error)-4)

Parameter passed is invalid or out of range

VL53L0X_ERROR_MIN_CLIPPED

#define VL53L0X_ERROR_MIN_CLIPPED   ((VL53L0X_Error)-2)

Warning parameter passed was clipped to min before to be applied

VL53L0X_ERROR_MODE_NOT_SUPPORTED

#define VL53L0X_ERROR_MODE_NOT_SUPPORTED   ((VL53L0X_Error)-8)

Asked mode is not supported by the device

VL53L0X_ERROR_NOT_IMPLEMENTED

#define VL53L0X_ERROR_NOT_IMPLEMENTED   ((VL53L0X_Error)-99)

Tells requested functionality has not been implemented yet or not compatible with the device

VL53L0X_ERROR_NOT_SUPPORTED

#define VL53L0X_ERROR_NOT_SUPPORTED   ((VL53L0X_Error)-5)

Function is not supported in current mode or configuration

VL53L0X_ERROR_RANGE_ERROR

#define VL53L0X_ERROR_RANGE_ERROR   ((VL53L0X_Error)-6)

Device report a ranging error interrupt status

VL53L0X_ERROR_REF_SPAD_INIT

#define VL53L0X_ERROR_REF_SPAD_INIT   ((VL53L0X_Error)-50)

Error during reference SPAD initialization

VL53L0X_ERROR_TIME_OUT

#define VL53L0X_ERROR_TIME_OUT   ((VL53L0X_Error)-7)

Aborted due to time out

VL53L0X_ERROR_UNDEFINED

#define VL53L0X_ERROR_UNDEFINED   ((VL53L0X_Error)-3)

Unqualified error