Inheritance diagram for SystemPLM100S::SX1276:

Public Attributes
bool	usePABOOST = true
Public Attributes inherited from LoRaRadioChip
void(*	onCADCompleted )(void *ctx, bool) = nullptr
	LoRa CAD (Carrier Activity Detection) 검사가 완료되면 호출될 콜백함수 포인터
void *	ctxOnCADCompleted
	onCADCompleted 가 호출될 때 함께 전달될 context
int8_t	antennaGain = 0
	Antenna gain을 고려한 송신 출력(EIRP)을 사용하기 위한 antenna gain (단위: dBi).
void(*	onRxTimeout )(void , GPIOInterruptInfo_t ) = nullptr
void *	ctxOnRxTimeout
Public Attributes inherited from PacketRadioChip
void(*	onRxStarted )(void , GPIOInterruptInfo_t )
	수신이 시작될 때 호출될 콜백함수 포인터
void *	ctxOnRxStarted
	onRxStarted 가 호출될 때 함께 전달될 context
void(*	onRxDone )(void , GPIOInterruptInfo_t )
	수신이 완료될 때 호출될 콜백함수 포인터
void *	ctxOnRxDone
	onRxDone 이 호출될 때 함께 전달될 context
void(*	onTxDone )(void , bool, GPIOInterruptInfo_t )
	transmit() 후, 송신이 완료될 때 호출될 콜백함수 포인터
void *	ctxOnTxDone
	onTxDone 이 호출될 때 함께 전달될 context
void(*	onChannelBusy )(void , GPIOInterruptInfo_t )
	cca() 시 채널이 혼잡할 때 호출될 콜백함수 포인터
void *	ctxOnChannelBusy
	onChannelBusy 가 호출될 때 함께 전달될 context
int16_t	dBccaThreshold = -65
	cca() 시 채널이 혼잡하다고 판단하기 위한 에너지 레벨을 설정합니다. (단위: dB, 기본값: -65)

Protected Member Functions
bool	usingPaBoost (uint32_t channel) override
void	setAntSwLowPower (bool) override
void	setAntSwRx () override
void	setAntSwTx () override
Protected Member Functions inherited from SX1276Chip
void	configureTxPower (int8_t dBm)
void	configureCodingRate (Radio::LoRaCR_t coderate)
void	dio0Interrupt (GPIOInterruptInfo_t &)
Protected Member Functions inherited from SX127xChip
virtual void	reset ()
virtual void	select ()
virtual void	deselect ()
void	ccaTask () override
void	rxTimeout ()
void	writeBuffer (uint8_t addr, uint8_t *buffer, uint8_t size)
void	write (uint8_t addr, uint8_t data)
void	writeFifo (uint8_t *buf, uint8_t size)
void	readBuffer (uint8_t addr, uint8_t *buffer, uint8_t size)
uint8_t	read (uint8_t addr)
void	readFifo (uint8_t *buffer, uint8_t size)
void	setOpMode (uint8_t opMode)
void	setTx ()
void	dio1Interrupt (GPIOInterruptInfo_t &)
void	dio2Interrupt (GPIOInterruptInfo_t &)
void	dio3Interrupt (GPIOInterruptInfo_t &)
void	dio4Interrupt (GPIOInterruptInfo_t &)
void	setModemFsk ()
void	setModemLoRa ()

Additional Inherited Members
Public Types inherited from LoRaRadioChip
enum	State_t { RF_IDLE = 0 , RF_RX_RUNNING = 1 , RF_TX_RUNNING = 2 , RF_CAD = 3 }
Public Member Functions inherited from SX1276Chip
	SX1276Chip (SPI &s, int8_t pinReset, int8_t pinCs, int8_t pinRxTx, int8_t pinDio0, int8_t pinDio1, int8_t pinDio2, int8_t pinDio3, int8_t pinDio4)
virtual error_t	begin (bool useTcxo)
	칩을 시작합니다.
error_t	begin ()
	칩을 시작합니다.
void	setLoRaSymbolTimeout (uint16_t nSymbols)
int16_t	getRssi ()
	RSSI를 dB 단위로 읽습니다.
void	setTxConfig (Radio::Modulation_t modem, int8_t power, uint32_t fdev, uint32_t bandwidth, uint32_t datarate, uint8_t coderate, uint16_t preambleLen, bool fixLen, bool crcOn, bool freqHopOn, uint8_t hopPeriod, bool iqInverted, uint32_t timeout) override
void	setRxConfig (Radio::Modulation_t modem, uint32_t bandwidth, uint32_t datarate, uint8_t coderate, uint32_t bandwidthAfc, uint16_t preambleLen, uint16_t symbTimeout, bool fixLen, uint8_t payloadLen, bool crcOn, bool freqHopOn, uint8_t hopPeriod, bool iqInverted, bool rxContinuous) override
Public Member Functions inherited from SX127xChip
	SX127xChip (SPI &s, int8_t pinRxTx, int8_t pinReset, int8_t pinCs, int8_t pinDio0, int8_t pinDio1, int8_t pinDio2, int8_t pinDio3, int8_t pinDio4)
error_t	readFrame (RadioPacket *frame)
	수신 버퍼에서 프레임을 읽습니다.
bool	bufferIsEmpty ()
void	flushBuffer ()
virtual void	sleep ()
virtual void	wakeup ()
error_t	transmit (RadioPacket *frame)
bool	cca () override
	채널이 혼잡한지 아닌지 검사합니다.
bool	supportsLoRaSpreadingFactor (Radio::LoRaSF_t sf) const override
	Returns whether this driver supports the given LoRa spreading factor.
void	setTxPower (int8_t dBm)
	송신 출력을 설정합니다.
int8_t	getTxPower ()
	현재 설정된 송신 출력을 반환합니다.
void	setChannel (uint32_t channel) override
	Sets the channels configuration.
uint32_t	getChannel ()
	Gets the channels configuration.
void	setPublicNetwork (bool) override
	Syncword를 설정합니다.
void	setSyncword (uint8_t syncword)
void	doCAD () override
	CAD (Carrier Activity Detection) 검사를 수행합니다. (LoRa 전용).
void	setIQMode (bool normal)
	LoRa I&Q 신호 모드를 설정합니다.
void	transmitCW () override
	Continuous Wave (CW) 신호를 송출합니다. (LoRa 전용).
void	transmitCW (bool enable)
void	setOcp (bool enable, uint8_t iMax)
	Overload Current Protection (OCP) 설정을 합니다.
void	setStandby () override
State_t	getStatus () override
Public Member Functions inherited from LoRaRadioChip
virtual void	setRadio (Radio::LoRaSF_t sf, Radio::LoRaBW_t bw, Radio::LoRaCR_t cr, bool crcOn=true, bool iqInverted=false, uint16_t symbTimeout=0, uint16_t preambleLen=8, uint8_t payloadLen=0, bool freqHopOn=false, uint8_t hopPeriod=0)
virtual void	setRadio (uint32_t datarate, uint32_t bandwidth, uint32_t bandwidthAfc, uint32_t fDev, bool crcOn=true, uint16_t symbTimeout=0, uint16_t preambleLen=5, uint8_t payloadLen=0)
uint32_t	getTimeOnAir (uint8_t payloadLen)
virtual void	setFreqOffset (int32_t offsetHz)
	중심 주파수 오차를 제거하기 위한 offset을 설정합니다.
virtual int32_t	getFreqOffset ()
	중심 주파수 오차를 제거하기 위한 offset을 가져옵니다.
Public Member Functions inherited from PacketRadioChip
void	setCcaThreshold (int16_t dBthreshold)
virtual int64_t	getDeviceTimestamp ()
	장치 내부의 timestamp 값을 읽습니다.
Static Public Member Functions inherited from LoRaRadioChip
static uint32_t	TimeOnAir (Radio::LoRaSF_t, Radio::LoRaBW_t, Radio::LoRaCR_t, uint16_t preambleLen, bool fixLen, uint8_t payloadLen, bool crcOn)
static uint32_t	TimeOnAir (uint32_t datarate, uint32_t bandwidth, uint16_t preambleLen, bool fixLen, uint8_t payloadLen, bool crcOn)
Static Protected Member Functions inherited from SX127xChip
static uint8_t	GetFskBandwidthRegValue (uint32_t bandwidth)
Static Protected Member Functions inherited from LoRaRadioChip
static void	CCATask (void *)
Protected Attributes inherited from SX127xChip
SPI &	spi
const int8_t	pinReset
const int8_t	pinCs
const int8_t	pinDio0
const int8_t	pinDio1
const int8_t	pinDio2
const int8_t	pinDio3
const int8_t	pinDio4
const int8_t	pinRxTx
bool	began = false
bool	rxCrcOk = false
Radio::Modulation_t	modem
State_t	state
uint32_t	channel
struct {
uint8_t PreambleDetected
uint8_t SyncWordDetected
uint16_t NbBytes
RadioPacket * txFrame
Timer timeoutTimer
uint16_t timeoutValue
uint32_t Bandwidth
uint32_t Datarate
uint8_t FixedPayloadLen
bool CrcOn
}	fskPacketHandler
struct {
int8_t SnrValue
Radio::LoRaCR_t CodingRate
Radio::LoRaBW_t Bandwidth
Radio::LoRaSF_t Datarate
bool iqInverted
}	loraPacketHandler
uint8_t	rxBuffer [RX_BUFFER_SIZE]
uint16_t	rxPacketSize
int16_t	rssiValue
Protected Attributes inherited from LoRaRadioChip
struct {
uint32_t channel
Radio::Modulation_t modulation
int8_t txPower
uint32_t txTimeout
union {
struct {
uint32_t drHz
uint32_t bwHz
uint32_t afcBwHz
uint32_t fDevHz
uint16_t symbTimeout
bool addCrc
uint16_t preambleLength
uint8_t fixedPayloadLength
} FSK
struct {
Radio::LoRaSF_t sf
Radio::LoRaCR_t cr
Radio::LoRaBW_t bw
uint16_t preambleLength
uint8_t fixedPayloadLength
bool iqInverted
bool addCrc
uint16_t symbTimeout
} LoRa
}
}	defaultSetting
volatile bool	inCca = false
bool	inChannelBusyHandler = false
int32_t	freqOffset

Member Function Documentation

◆ setAntSwLowPower()

void SystemPLM100S::SX1276::setAntSwLowPower ( bool )

overrideprotectedvirtual

Reimplemented from SX127xChip.

◆ setAntSwRx()

void SystemPLM100S::SX1276::setAntSwRx ( )

overrideprotectedvirtual

Reimplemented from SX127xChip.

◆ setAntSwTx()

void SystemPLM100S::SX1276::setAntSwTx ( )

overrideprotectedvirtual

Reimplemented from SX127xChip.

◆ usingPaBoost()

bool SystemPLM100S::SX1276::usingPaBoost ( uint32_t channel )

overrideprotectedvirtual

Reimplemented from SX127xChip.

The documentation for this class was generated from the following file:

plm100s/include/System.hpp

Public Attributes

Protected Member Functions

Additional Inherited Members

Member Function Documentation

◆ setAntSwLowPower()

◆ setAntSwRx()

◆ setAntSwTx()

◆ usingPaBoost()